STAINLESS STEEL FOOD GRADE TANKER

---

STAINLESS STEEL FOOD-GRADE TANKER
TECHNICAL SPECIFICATIONS

DIMENSIONS
WIDTH: MAX. 2 550 MM
HEIGHT: MAX. 4 000 MM *
AXLE SPACING: 1 300 ~ 1 400 MM *
KING‑PIN HEIGHT: 1 250 ~ 1 350 MM *
TARE WEIGHT: 6 000 ~ 9 750 KG *

CAPACITY
GEOMETRIC VOLUME: 20 000 ~ 32 000 L *
NUMBER OF COMPARTMENTS: 1 ~ 5 *

TANK
MATERIAL SERIES: STAINLESS STEEL *
CARRIED PRODUCTS: MILK, CHOCOLATE, WINE, MOLASSES, FOOD OILS, ETC. *
OPERATING TEMPERATURE: ‑20 ˚C +150 ˚C

• MAY VARY BASED ON PRODUCT TYPE AND OPTIONAL EQUIPMENT

TANK BODY
DESIGNED ACCORDING TO EN 14025 STANDARD, CYLINDRICAL SECTION,
EXTERNAL BOSS AT FRONT AND REAR, INTERNAL BAFILES AS PER COMPARTMENT CONFIGURATION AND EN 14025,
ISO 3834 CERTIFIED WELDING QUALITY,
CONSTRUCTED WITH SEAMLESS, ONE-PIECE CYLINDRICAL SHEETS, MINIMAL WELD JOINTS, SMOOTH SURFACE,
HIGH-PERFORMANCE ROBOTIC WELDING TO MINIMIZE STRESS AND DEFECTS,
FEA-ANALYZED ROBOTIC WELDED MONOBLOCK CONNECTION SADDLES AT CHASSIS JOINTS FOR INCREASED STRENGTH,
SPECIAL DRAINAGE DESIGN ENSURES COMPLETE EMPTYING OF EACH COMPARTMENT,
CLEANING MANHOLE FOR INTERNAL/SINGLE-COMPARTMENT CIP,
EXPANSION AND OVERFLOW SAFETY COMPLIANT WITH EN 15120.

INSULATION
TANK BODY COVERED WITH ROCK WOOL FOR LONG-TERM TEMPERATURE CONTROL AND VISCOSITY MAINTENANCE,
EXTERNAL CLADDING PREVENTS SAGGING, RUBBER SEALS AT JOINTS ENSURE LEAK PROOFING AND VISUAL FINISH,
FRONT AND REAR INSULATION BULGES INCLUDED.

FILLING / DRAINING LINES
FILLING LINE: COUPLINGS ALLOW BOTTOM FILLING ON RIGHT (DRIVING DIRECTION) OR REAR, OR TOP FILL VIA MANHOLE COVER OR CLOSED-CIRCUIT COUPLINGS,
DRAINING LINE: EN 13094 COMPLIANT, LOCATED ON RIGHT, SLOPED TO ENSURE COMPLETE DISCHARGE, INSULATED, OPTIONAL MANUAL BOTTOM VALVE WITH HEAT-RESISTANT HANDWHEEL, 3-STEP SAFETY SHUT-OFF COUPLINGS, DRAIN TRAY TO COLLECT POST-DRAIN DRIP, ISO 3834 CERTIFIED, ROBOT-WELDED IMPORTED ELBOW FITTINGS.

EQUIPMENT
STANDARD FOOD-GRADE STAINLESS ACCESSORIES SUITABLE FOR LIQUID FOOD TRANSPORT.

CHASSIS
SPECIAL MONOBLOCK CHASSIS DESIGNED FOR ROLLOVER SAFETY, ANGLED HORIZONTALLY AND VERTICALLY,
BOLTED BODY CONSOLES ENSURE RIGIDITY AND STRENGTH,
STRESS-RELIEF POCKETS DISTRIBUTE ROAD LOADS,
CHASSIS COMPONENTS PRODUCED BY ISO 3834-CERTIFIED WELDERS USING SYNCHRONOUS WELDING MACHINES.

CHASSIS EQUIPMENT
KING‑PIN: ECE R 55 TYPE-APPROVED, REMOVABLE 2″ OR 3.5″,
LANDING GEARS: DUAL-SPEED, 25 T DYNAMIC / 50 T STATIC CAPACITY EACH,
AXLES: 9 OR 10 T CAPACITY, AIR SUSPENSION WITH DISK BRAKES,
WHEELS: 14.00 OR 11.75 × 22.5,
TIRES: 425 OR 385/65 R 22.5,
BRAKING SYSTEM: ECE R 13 COMPLIANT WITH RSP AND 2S2M EBS,
ELECTRICAL SYSTEM: ECE R 105 ADR-COMPATIBLE,
BUMPER: ECE R 58 COMPLIANT.

PAINT
INSIDE PICKLING AND PASSIVATION TO PREVENT BACTERIA AND CHEMICAL CORROSION,
EXTERIOR FINISH WITH AT LEAST TWO COATS OF EPOXY PRIMER,
TWO COATS OF ACRYLIC PAINT WITH OVEN-BAKED TOPCOAT,
UNIFORM GLOSS FINISH ACHIEVED WITH ADVANCED EQUIPMENT.

TÖKE TRAILER RESERVES THE RIGHT TO MODIFY PRODUCT DETAILS. TECHNICAL DATA ARE APPROXIMATE AND FOR STANDARD MODELS. DIMENSIONS MAY VARY WITH TRUCK BRAND/MODEL. INFORMATION DOES NOT CONSTITUTE AN OFFER. FOR DETAILS, PLEASE CONTACT US.