STEEL FUEL TANKER

---

TECHNICAL SPECIFICATIONS

DIMENSIONS

WIDTH : MAX. 2 550 MM
HEIGHT : MAX. 4 000 MM *
AXLE SPACING RANGE : 1 300 ~ 1 400 MM *
KING‑PIN HEIGHT : 1 250 ~ 1 350 MM *
TARE WEIGHT : 5 000 ~ 6 000 KG *

CAPACITY

GEOMETRIC VOLUME : 20 000 ~ 40 000 L *
NUMBER OF COMPARTMENTS : 1 ~ 7 *

TANK

TANK CODE : LGBF
TANK CLASS : CLASS 3
MATERIAL SERIES : CARBON STEEL
CARRYING PRODUCTS : GASOLINE, DIESEL, JET A‑1 FUEL OIL
OPERATING TEMPERATURE : ‑20 ˚C +50 ˚C

• MAY VARY DEPENDING ON PRODUCT TYPE AND OPTIONAL EQUIPMENT

TANK BODY BUILT TO EN 13094 DESIGN STANDARD, CONIC‑CYLINDRICAL SECTION, APPLIED WITH FRONT AND REAR EXTERNAL BULGES, INTERNAL BULGES / BAFFLES AS PER COMPARTMENT CONFIGURATION AND EN 13094, ISO 3834 WELDMENT QUALITY APPROVED, ISO 9001:2015 QUALITY MANAGEMENT SYSTEM, ISO 14001:2015 ENVIRONMENTAL MANAGEMENT SYSTEM, EN ISO 9606‑1 WELDER QUALIFICATION CERTIFICATE, COMPLIANT WITH ECE R 105 DANGEROUS GOODS TRANSPORT REGULATION, COMPLIANT WITH ECE R 111 ROLLOVER STABILITY REQUIREMENT.

TANKER MANUFACTURED WITH SEAMLESS, ONE-PIECE SHEETS, MINIMAL WELD JOINTS, SMOOTH SURFACE, ROBOTIC WELDING TO MINIMIZE WELD DEFECTS AND HANDLE IMPACT LOADS, CHASSIS JOINTS ANALYZED BY FEA UNDER MAXIMUM LOAD, MONOBLOCK CONNECTIONS WELDED BY ROBOTS, CHASSIS INCLINATION ENSURES FULL DRAINAGE, COMPLIES WITH EN 15120 FOR EXPANSION AND OVERFILL VENT SAFETY.

FILLING / DRAINING LINES:
FILLING LINE: COUPLINGS FOR SIDE-BOTTOM FILLING ON RIGHT, OR TOP FILL THROUGH MANHOLE COVER.
DRAINING LINE: EN 13094 COMPLIANT, ON RIGHT SIDE, SLOPED TO EMPTY COMPLETELY BACK TO COUPLINGS, ROBOTICALLY WELDED IMPORTED FITTINGS, ISO 3834 WELD QUALITY.

CHASSIS:
ROBUST SPECIAL DESIGN MONOBLOCK CHASSIS WITH ROLLOVER SAFETY, ROBOTICALLY WELDED CHASSIS PARTS CERTIFIED EN ISO 3834, STRESS-RELIEF POCKETS DISTRIBUTE ROAD LOADS, ROBOTIC WELDING ON CONNECTION SADDLES ENSURES MONOCOQUE STRUCTURE.

CHASSIS EQUIPMENT:
KING‑PIN: ECE R 55 TYPE‑APPROVED, 2″ OR 3.5″ REMOVABLE.
LANDING GEARS: DUAL-SPEED SUPPORT, 25 T DYNAMIC, 50 T STATIC CAPACITY EACH.
AXLES: 9 OR 10 T AIR‑SUSPENSION DISK‑BRAKED SET.
WHEELS: 14.00 OR 11.75 × 22.5
TIRES: 425 OR 385/65 R 22.5
BRAKING SYSTEM: ECE R 13‑COMPLIANT RSP WITH 2S2M EBS.
ELECTRICAL SYSTEM: ECE R 105 ADR‑COMPLIANT ELECTRICAL SET.
BUMPER: ECE R 58‑COMPLIANT.

PAINT: MINIMUM TWO COATS OF EPOXY PRIMER, TWO COATS OF ACRYLIC TOPCOAT WITH “OVEN-BAKED” APPLICATION, EVEN GLOSSY FINISH THROUGH ADVANCED EQUIPMENT.

TÖKE TRAILER RESERVES THE RIGHT TO MODIFY PRODUCT DETAILS. TECHNICAL DATA ARE APPROXIMATE AND FOR STANDARD MODEL USE. DIMENSIONS MAY VARY WITH TRUCK BRAND/MODEL. INFORMATION ABOVE IS NOT A QUOTATION. FOR MORE DETAILS, PLEASE CONTACT US.